Floor Sanding & Polishing in Toowong
Dyna Floors has been restoring timber floors across Brisbane since 2012, and Toowong is one of the inner-west suburbs we know well. While parts of Toowong have filled in with newer apartments near the busway and university, the pockets around Auchenflower and further west still hold plenty of older Queenslanders and character homes with original timber underneath — floors that are often overdue for their first proper sand and polish in years.
Floor sanding in Toowong costs $45–$90/m², most jobs land $55–$75/m².
Not in Toowong? See all the areas we service.
Key Facts
Floor sanding in Toowong costs $45–$90/m², most jobs land $55–$75/m²
★★★★★ 5.0 (20 Google reviews)
Staircases priced separately, per riser/tread — not by square metre
QBCC Licence 15343047, ATFA Accredited
Servicing Brisbane since 2012, 20+ years hands-on trade experience
Free, honest quotes — no lead-gen directory guesswork
What it costs in Toowong
Most Toowong jobs land between $55–$75 per square metre, with the exact rate depending on job size, floor condition and finish. Most homes take 2–4 days start to finish. For the full breakdown by job size, condition tier and finish type, see our Floor Sanding Cost Brisbane guide.
Deck sanding and re-coating in Toowong
Brisbane sun and rain are hard on timber decks, and Toowong’s entertainer decks and verandahs see plenty of both. We sand weathered, grey deck boards back to fresh timber and re-coat them with durable exterior finishes — restoring the colour and protecting the timber for years of use. Deck jobs are quoted separately from interior floors — send us a photo and we’ll give you a straight price.
For the full rundown on outdoor finishes and drying times, see our deck sanding service.
Frequently Asked Questions
-
Between $45 and $90 per square metre, same as the rest of Brisbane. Toowong’s post-war hardwoods often need the heavier first cut that pushes toward the upper tier, while units with newer floors can land at the lighter end. Our cost guide explains what moves a job between tiers.
-
Often, yes — but Toowong’s mix skews post-war, and those homes typically hide dense hardwood like Spotted Gum or Ironbark under old coverings. Dense boards sand beautifully but work the machines harder, and decades-old finishes need a heavier first cut, which is why these jobs price toward the upper end of the range.
-
Usually, yes — hardwood strip flooring was standard in that era, and it generally comes up beautifully once the carpet, smooth-edge and staples are out. We check a corner first so you know exactly what you’ve got before committing to the job.
-
Yes — Toowong has plenty of them and we’re set up for it. Body-corporate approvals, lift protection and agreed working hours are all routine for us, and our low-dust setup matters even more in a building where the hallway is shared. Just flag it’s a unit when you get in touch.
-
Yes. We source boards in the same species and profile, weave them into the existing floor rather than patching a visible block, and the sand-and-coat over the top brings old and new to one colour. On post-war hardwoods the match is usually seamless once coated.
-
All the Brisbane regulars — Spotted Gum, Blackbutt, Ironbark and Hoop Pine each behave differently under the machine and take coatings differently, and we adjust grit sequence and finish choice to suit. If you’re not sure what’s under your carpet, we’ll identify it when we quote.
-
Usually. Dark staining from long-gone leaks often sands out entirely; deep moisture damage that’s cupped or rotted the board needs replacement and blending. We’ll tell you which camp yours falls into at the quote — and replacing a handful of boards is far cheaper than people fear.
-
Yes. A lot of Toowong homes pair a floor refresh with the back deck, and we handle both in one visit — the deck side runs coarser first cuts and finishes built for weather rather than indoor systems. Ask for it in the quote and we’ll price it as its own line so it’s clear.
-
It can be — plenty of Toowong jobs are a couple of bedrooms after carpet comes up. Small jobs carry a minimum fee, so per-metre they cost more than a whole house, but if the rest of the floor’s fine there’s no reason to redo it. We’ll give you both numbers so you can decide.
-
It affects drying more than sanding. Summer humidity stretches the time between coats, so a job that runs three days in winter might need four in February — we build that into the schedule rather than rushing coats. The sanding itself is identical year-round.
-
Dust extraction runs on the machines the entire time we’re sanding, which captures the bulk of it before it reaches the air. What little escapes stays close to the work area — worth knowing if you’re staying in the house or working from home while we’re there.
Explore More
Non-Toxic Finishes | Staining & Lime Washing
Serving Paddington, Kangaroo Point, Jindalee, Redcliffe, Narangba, and Ipswich.

