Floor Sanding & Polishing in Jindalee

‍ ‍

Dyna Floors has been restoring timber floors across Brisbane since 2012, and Jindalee is one of the western suburbs we know well. Whether you’re in a highset brick home near the river or a newer build closer to Mount Ommaney, we bring the same careful, owner-operated approach to every job — from a straightforward sand and polish to full restoration.

Jindalee homeowners can expect floor sanding to run $45–$90/m², with $55–$75/m² typical.

Quick overview

  • What we do: Timber floor sanding, repairs and gap filling, plus staining, lime washing and full restoration. Non-toxic and low-VOC finish options available.

  • Where we work in Jindalee: Among the suburb’s older Queenslanders and character homes, working around inner-city access constraints where needed.

  • What we use: Bona coating systems for durable polishing, plus Berger Seidle and Loba products for custom colour matching and staining.

  • Our standard: Lagler sanding machines with Festool dust extraction for controlled, low-mess sanding, and careful edge work throughout.

    Next step: Send us photos or book a quick visit, and we'll give you a clear, honest written quote.

Key Facts

  • Floor sanding in Jindalee costs $45–$90/m², most jobs land $55–$75/m²

  • ★★★★★ 5.0 (20 Google reviews)

  • Staircases priced separately, per riser/tread — not by square metre

  • QBCC Licence 15343047, ATFA Accredited

  • Servicing Brisbane since 2012, 20+ years hands-on trade experience

  • Free, honest quotes — no lead-gen directory guesswork

Water damage and flood-affected floors

Jindalee’s proximity to the Brisbane River means a fair few homes in the area have dealt with water-affected timber floors at some point, whether from a major flood event or simply rising damp in a low-lying block. Water damage doesn’t always mean a full floor replacement — many boards can be saved with the right sanding and re-coating approach once they’ve properly dried out. If you’re not sure whether your floor is salvageable, we’re happy to take a look and give you an honest assessment before you spend money on anything.

What we offer Jindalee homeowners

  • Floor sanding — removing old finishes, water stains, scratches, and general wear back to bare timber

  • Polishing — a durable, professional finish using Bona coating systems

  • Staining — custom colour matching to suit your home, using Berger Seidle and Loba products

  • Restoration — for older or damaged floors that need more than a standard sand and polish.

For the coating itself, we offer raw/ultra-matte, satin, semi-gloss and high-gloss options, in both non-toxic and low-VOC systems. Read more about our non-toxic and low-VOC finishes.

Backyard decks are half the work out this way — see deck sanding and re-coating for how we do them.

Nearby, we also service Toowong, Paddington and Ipswich — see the cost guide for what shapes a price.

Why Dyna Floors

  • Owner-operated — Michri is on-site for your job, from start to finish

  • QBCC licensed (15343047)

  • 20+ years of hands-on trade experience

  • Straightforward quotes, no pressure

Bronze sculpture displayed on a restored timber floor in a Brisbane home, showcasing the polished finish by Dyna Floors.
Modern Brisbane kitchen with white cabinets and a freshly polished timber floor restored by Dyna Floors.

Frequently Asked Questions

  • It depends on how deep the water got and how long the boards sat wet. Cupping or minor staining can often be sanded back and re-coated. Boards that have swollen, warped badly, or gone soft usually need replacing in sections. We won't know for sure until we've had a look, and we'll always tell you honestly if sanding isn't going to fix it.

  • Most homes take 3–5 days from start to finish, including drying time between coats. Bigger jobs or full restorations can take longer — we'll give you a proper timeframe once we've seen the floor.

  • Usually, yes — we can sequence rooms so you keep use of part of the house, and give exact re-entry times after each coat. Most Jindalee families stay home for a standard sand and polish.

  • Hard-wearing water-based systems from Bona, Berger Seidle and Loba — low-fume, quick-curing, and matched to how each home gets used. Satin is the most popular pick for busy households.

  • Text or email photos of your floors and we’ll come back with a clear written price, free, no obligation. Call Michri on 0468 410 607 to get it moving.

  • $45–$90 per square metre depending on condition. Jindalee’s 70s and 80s homes usually have solid, straightforward floors that sit in the standard tier, unless water damage or previous DIY coatings add restoration work. The cost guide covers the tiers in detail.

  • Less than most people expect. We use Lagler sanding machines paired with Festool dust extraction, which captures the bulk of the dust as we go rather than letting it settle through the house. There’s always some fine dust that comes with any sanding job — that’s just the nature of the work — but it’s a fraction of what old-school sanding used to kick up, and we keep the work area as contained as possible throughout.

Get a quote for your Jindalee floors

Give us a call on 0468 410 607 or get in touch through the website for a free, no-obligation quote. We can talk through timing, what’s involved, and what to expect — before you commit to anything.