Floor Sanding & Polishing in Corinda
Dyna Floors has been restoring timber floors across Brisbane since 2012. Corinda is where a lot of people buy their first proper house — post-war and interwar homes at the more affordable end of the western belt, usually with carpet down and hardwood underneath that nobody has looked at in decades.
If you have never had a floor sanded before, the process is not obvious from the outside. This page walks through what actually happens, day by day, so you know what you are agreeing to before you agree to it.
Floor sanding in Corinda costs $55–$75/m² for most jobs, with the full range $45–$90/m² depending on the floor.
Not in Corinda? See all the areas we service.
Quick overview
What we do: Timber floor sanding, repairs and gap filling, plus staining, lime washing and full restoration. Non-toxic and low-VOC finish options available.
Where we work in Corinda: Post-war and interwar homes across Corinda, from the streets around the station out along Oxley Road, and through the neighbouring western-line suburbs.
What we use: Bona coating systems for durable polishing, plus Berger Seidle and Loba products for custom colour matching and staining.
Our standard: Lagler sanding machines with Festool dust extraction for controlled, low-mess sanding, and careful edge work throughout.
Next step: Send us photos or book a quick visit, and we will give you a clear, honest written quote.
Key facts
Floor sanding in Corinda costs $55–$75/m² for most jobs, full range $45–$90/m²
★★★★★ 5.0 from 20 Google reviews
Most homes take 2–4 days start to finish as a general guide
QBCC Licence 15343047, ATFA Accredited
Staircases priced per tread, not by square metre
Free quotes — no lead-gen directory guesswork
What it costs in Corinda
Most Corinda jobs land between $55–$75 per square metre, set by job size, floor condition and finish. A typical three-bedroom post-war home comes to $4,500–$8,000 all up. For the full breakdown by job size, condition tier and finish type, see our Floor Sanding Cost Brisbane guide.
Worth knowing: a small job costs more per square metre than a big one. The setup, the machines and the travel are the same whether the floor is 30m² or 130m². Our minimum job is around $2,000.
What actually happens, step by step
Before we start. Furniture out of the work area. We can help move heavy items but the room needs to be clear. Curtains down where they touch the floor. Pets somewhere else — machines are loud.
Lifting the carpet. If the carpet is still down, it has to come up along with the underlay, the tack strip around the perimeter, and every staple. Staples are the slow part. Missing one puts a mark down the whole length of a board.
Assessment. This is where we find out what we are actually dealing with. Board depth, previous sands, loose boards, gaps, old glue or paint, and any repairs needed. If something changes the price, we tell you here — not on day three.
The cut. Coarse grit first to take off the old finish and level the floor, then progressively finer passes. Edges and corners done by hand with a smaller machine, because the big one cannot reach them.
Filling. Gaps and nail holes filled where appropriate. Not every gap should be filled — a floor that moves seasonally will push fill back out.
Coating. Usually three coats, with a light buff between them. Each coat needs its drying time and that time is not negotiable.
Cure. The coating is dry to walk on well before it is fully hardened. We will tell you when you can walk on it, when furniture can go back, and when rugs can go down. Those are three different dates.
What is under your carpet
In a Corinda post-war home, usually tongue-and-groove strip hardwood — Brush Box, Blackbutt or a mixed hardwood, laid when the house was built and covered up not long after.
It is generally in better shape than people fear. Carpet protects boards from sun and wear, so what looks alarming when you first pull a corner up is often just tack strip holes, staples and a bit of old glue in the wet areas.
What we do want to know about before quoting: any water damage, any springy or bouncy spots, and whether the floor has been sanded before.
Can we stay in the house?
Usually yes, with the work area off-limits. With modern low-odour finishes it is far more manageable than the old solvent days.
What it realistically means is living around the job. If the whole floor is being done at once, you need somewhere else for a few nights. If we can stage it room by room, you can stay. Tell us which you would prefer at quote stage and we will map it out.
Frequently Asked Questions
-
$45–$90 per square metre, with most Corinda jobs landing $55–$75/m² depending on floor condition, job size and finish. A typical three-bedroom post-war home comes to $4,500–$8,000 all up. Our minimum job is around $2,000. Free quote — send photos or book a visit.
-
Most homes take 2–4 days start to finish as a general guide. Floors needing board repairs or gap filling take longer. The coating stages have fixed drying times that cannot be rushed, so a job cannot be compressed just because the calendar is tight.
-
The work area needs to be clear. We can help with heavy items, but the more that is out before we arrive, the faster the job runs and the better the result around the edges.
-
No, we do it as part of the job — carpet, underlay, tack strip and staples. If you have already lifted it, check for leftover staples, because they are the slow part and every missed one leaves a mark.
-
Three different dates. Light foot traffic comes first, furniture later, and rugs later again because a rug traps solvent under it while the coating is still hardening. We give you the actual dates at handover rather than a general rule.
-
No. A floor that moves seasonally will push fill straight back out, and a wide gap filled at the driest point of the year opens up worse later. We fill where it makes sense and leave what should be left.
-
Depends how much timber is left above the tongue. We check depth before quoting. If a full sand is not on, a light cut and re-coat is often a better and cheaper answer.
-
We run Lagler machines with Festool dust extraction, which keeps dust well under control compared with old-school sanding. There is always a little, but we keep it tight.
Explore More
Floor Sanding Cost Brisbane | Water-Based vs Solvent | Non-Toxic Finishes
Serving Sherwood, Graceville, Chelmer and Indooroopilly.